Tuesday, September 6, 2016
Saturday, July 23, 2016
SOLAR PV-WIND HYBRID POWER GENERATION SYSTEM
- PREPARED BY, UAGES LLC SOLAR
PV-WIND HYBRID POWER GENERATION SYSTEM
- ABSTRACT Renewable energy
sources i.e., energy generated from solar, wind, biomass, hydro-power, geothermal
and ocean resources are considered as a technological option for
generating clean energy. But the energy generated from solar and wind is
much less than the production by fossil fuels, however, electricity
generation by utilizing PV cells and wind turbine increased rapidly in recent
years.
- INTRODUCTION We all know that
the world is facing a major threat of fast depletion of the fossil fuel
reserves. Most of the present energy demand is met by fossil and nuclear
power plants. A small part is met by renewable energy technologies such as
the wind, solar, biomass, geothermal etc. There will soon be a time when
we will face a severe fuel shortage. As per the law of conservation of
energy, “Energy can neither be created, nor be destroyed, but it can only
be converted from one form to another”. Most of the research now is about
how to conserve the energy and how to utilize the energy in a better way.
Research has also been into the development of reliable and robust systems
to harness energy from nonconventional energy resources. Among them, the
wind and solar power sources have experienced a remarkably rapid growth in
the past 10 years. Both are pollution free sources of abundant power.
- BLOCK DIAGRAM
- IMPLEMENTATION OF HYBRID ENERGY SYSTEM Intermittent
energy resources and energy resources unbalance are the most important
reason to install a hybrid energy supply system. The Solar PV wind hybrid
system suits to conditions where sunlight and wind has seasonal shifts. As
the wind does not blow throughout the day and the sun does not shine for
the entire day, using a single source will not be a suitable choice. A
hybrid arrangement of combining the power harnessed from both the wind and
the sun and stored in a battery can be a much more reliable and realistic
power source. The load can still be powered using the stored energy in the
batteries even when there is no sun or wind.
- SYSTEM COMPONENTS
1.Photovoltaic solar power 2. Wind Power 3. Batteries 4. Inverter 5.
Microcontroller
- PHOTOVOLTAIC SOLAR POWER Solar panels are the medium to
convert solar energy into the electrical energy. Solar panels can convert
the energy directly or heat the water with the induced energy. PV
(Photovoltaic) cells are made up from semiconductor structures as in the
computer technologies. Sun rays are absorbed with this material and
electrons are emitted from the atoms. This release activates a current.
Photovoltaic is known as the process between radiation absorbed and the electricity
induced. Solar power is converted into the electric power by a common
principle called photo electric effect. The solar cell array or panel
consists of an appropriate number of solar cell modules connected in
series or parallel based on the required current and voltage.
- WIND POWER The wind energy is a
renewable source of energy. Wind turbines are used to convert the wind
power into electric power. Electric generator inside the turbine converts
the mechanical power into the electric power. Wind turbine systems are
available ranging from 50W to 3- 4 MW. The energy production by wind
turbines depends on the wind velocity acting on the turbine. Wind power is
able to feed both energy production and demand in the rural areas. It is
used to run a windmill which in turn drives a wind generator or wind
turbine to
- BATTERIES The batteries in the
system provide to store the electricity that is generated from the wind or
the solar power. Any required capacity can be obtained by serial or
parallel connections of the batteries. The battery that provides the most
advantageous operation in the solar and wind power systems are maintenance
free dry type and utilizes the special electrolytes. These batteries
provide a perfect performance for long discharges.
- INVERTER Energy stored in the battery is drawn by electrical
loads through the inverter, which converts DC power into AC power. The
inverter has in-built protection for Short-Circuit, Reverse Polarity, Low
Battery Voltage and Over Load.
- MICROCONTROLLER The
microcontroller compares the input of both Power system and gives the
signal to the particular relay and charges the DC Battery. The DC voltage
is converted into AC Supply by Inverter Circuit. The MOSFET (IRF 540) is
connected to the Secondary of the center tapped transformer. By triggering
of MOSFET alternatively, the current flow in the Primary winding is also
alternative in nature and we get the AC supply in the primary winding of
the transformer.
- CONCLUSION In the present work a Solar PV Wind Hybrid Energy System was implemented. A portion of the energy requirement for a private house, farm house, a small company, an educational institution or an apartment house depending on the need at the site where used has been supplied with the electricity generated from the wind and solar power. It reduces the dependence on one single source and has increased the reliability. Hence we could improve the efficiency of the system as compared with their individual mode of generation.
Tuesday, June 14, 2016
What the Heck is an MPPT Charge Controller?
Maximum Power Point Tracking, frequently referred to as MPPT, is an electronic system
that operates the Photovoltaic (PV) modules in a manner that allows the modules to produce all
the power they are capable of. MPPT is not a mechanical tracking system that “physically moves”
the modules to make them point more directly at the sun. MPPT is a fully electronic system that
varies the electrical operating point of the modules so that the modules are able to deliver
maximum available power. Additional power harvested from the modules is then made available as
increased battery charge current. MPPT can be used in conjunction with a mechanical tracking
system, but the two systems are completely different.
A MPPT, or maximum power point tracker is an electronic DC to DC converter that optimizes the match between the solar array (PV panels), and the battery bank or utility grid. To put it simply, they convert a higher voltage DC output from solar panels (and a few wind generators) down to the lower voltage needed to charge batteries.
Tuesday, June 7, 2016
Thursday, April 28, 2016
China’s PV Industry Slated for High Growth Over the Next Five Years
By Liu Yuanyuan
Director of Operations
Director of Operations
China is expected to continue to be the world’s fastest growing solar PV market during the five years spanning 2016 to 2020, with an addition of 15 GW to 20 GW in new PV power generation capacity each year, National Energy Administration director Nur Bekri said at the 9th Asia Solar Energy Forum.
The explosive growth in energy demand has inspired China to develop clean energy while optimizing its energy mix. As the world’s largest energy producer and consumer, China is willing to accelerate the development of clean and low-carbon energy, Nur Bekri added.
PV power generation has become one of the highlights of China’s energy development over the past five years, and thanks to a series of favorable policies, during the next five, the industry is set to enter a period of high growth.
By 2020, China’s installed solar power capacity is expected to reach 160 GW, generating 170 billion kWh in electricity annually, according to the National Energy Administration. In addition, solar power is expected to account for approximately 7 percent of the country’s power structure, 15 percent of new installed power capacity and 2.5 percent of total electricity generation by the end of 2020.
According to Liang Zhipeng, deputy director of the New Energy and Renewable Energy Department of the National Energy Administration, China plans to rigorously develop the solar power industry by promoting the development of distributed PV power generation systems, facilitating the construction of PV power stations and solar thermal power plants in resource-rich regions, especially in the western part of China, and boosting solar thermal utilization.
Stronger US Focus on Africa: The Electrify Africa Act
By Ikenna Emehelu and Rahwa Gebretnsaie
The U.S. government took steps in February to ensure that the Power Africa initiative will last beyond when the Obama administration leaves office.
Congress passed, and the president signed, an Electrify Africa Act that directs U.S. government agencies to prioritize loans, grants and technical support for power generation and transmission projects in sub-Saharan African countries.
The statute authorizes the administration to establish an inter-agency working group to oversee these efforts. The Electrify Africa Act has a goal of adding at least 20,000 MW of power and providing first-time access to power and power services for at least 50 million people in sub-Saharan Africa by 2020.
It builds on the Power Africa initiative by enlisting more government agencies in the effort. The Power Africa Initiative was launched in 2013 with a goal of doubling access to electricity across sub-Saharan Africa. A major criticism of the Power Africa initiative has been that, as an executive branch initiative without legislative backing, it is not binding on future administrations. The Electrify Africa Act addresses this criticism.
It does not allocate any new funds. The focus is on diverting existing authority for loans, guarantees and grants to leverage private sector capital for African projects. The president is required to deliver a strategy report to Congress by August 2016 outlining the specific steps the government plans to take to implement the new law.
Congress passed, and the president signed, an Electrify Africa Act that directs U.S. government agencies to prioritize loans, grants and technical support for power generation and transmission projects in sub-Saharan African countries.
The statute authorizes the administration to establish an inter-agency working group to oversee these efforts. The Electrify Africa Act has a goal of adding at least 20,000 MW of power and providing first-time access to power and power services for at least 50 million people in sub-Saharan Africa by 2020.
It builds on the Power Africa initiative by enlisting more government agencies in the effort. The Power Africa Initiative was launched in 2013 with a goal of doubling access to electricity across sub-Saharan Africa. A major criticism of the Power Africa initiative has been that, as an executive branch initiative without legislative backing, it is not binding on future administrations. The Electrify Africa Act addresses this criticism.
It does not allocate any new funds. The focus is on diverting existing authority for loans, guarantees and grants to leverage private sector capital for African projects. The president is required to deliver a strategy report to Congress by August 2016 outlining the specific steps the government plans to take to implement the new law.
Monday, April 25, 2016
Off grid hybrid Solar Wind power system for home use
Wind turbine and solar panel generate electricity, the electricity is charged into the battery group by the charging controller, and then through inverter, the system supply AC power for loads.
When there is no electricity in batter group, inverter will switch to grid and continue to provide power for loads, meanwhile, inverter will charge into battery to keep battery in good condition.
UAGES off grid hybrid solar wind power systems are very popular in Germany, Denmark and other European countries; the performance has been approval by our agents and customers.
Contact us at: Info@u-ages.com
1633 Broadway, 30th Floor,
New York, NY 10019
USA
Toll Free: (800) 398-8201
Friday, March 25, 2016
Why this new solar market could be set to explode
Right now, there’s an odd thing about solar in the United States (and elsewhere). It’s either really big — at the scale of massive solar farms with the capacity to generate tens or hundreds of millions of watts of electricity — or pretty small: on your rooftop, with maybe as little as 5 kilowatts, or thousand watts, of capacity.
Solar has been growing extremely fast in these existing markets. But more and more, analysts say, there’s a middle-range market whose large potential is just becoming clear. It’s bigger than individual rooftop installations but smaller than vast solar farms. And it’s for a much broader and diverse range of people than fairly wealthy, suburban homeowners.
Biogas heats up in Kenya as fuel of choice for the poor
By Kagondu Njagi
NAIROBI, (Thomson Reuters Foundation) – Poor Kenyans are increasingly switching to biogas for cooking, as traditional fuels like kerosene and gas cylinders remain expensive despite lower world oil prices.
According to Nairobi-based ASTICOM K Ltd, a company that recycles solid municipal waste to produce biofuel and electricity, the availability of simple, cheap methods to produce biogas has stimulated demand in poorer households.
“Once domestic users have the technology, they can generate as much biogas as they please,” said ASTICOM CEO Leah Tsuma.
The World Bank estimates that 77 percent of Kenyans have no access to electricity.
Data from the Kenya National Bureau of Standards shows that Liquefied Petroleum Gas (LPG), used by around a tenth of Kenyans for cooking, sells at around $23 for a 13 kg cylinder, nearly double the price in South Africa.
Around 45 percent of Kenyans live below the national poverty line, making it hard for them to afford fuels like LPG.
Biogas, on the other hand, has an upfront cost, but is practically free once the equipment is installed.
A basic home biogas unit costs between Ksh. 50,000 ($500) and Ksh. 80,000 – which is prohibitive for many.
Friday, March 11, 2016
OUR NEW PRODUCT "SOLAR HOME SYSTEM" WITH LITHIUM ION BATTERIES
Solar
panel
|
Peak
Power
|
12V/100W
solar panel
|
Seal
|
Encapsulated
with tempered glass
|
|
Service
life
|
25
years
|
|
Cables
on back
|
5
meters
|
|
Battery
|
Type
|
LiFePO4
lithium-ion batteries
|
Voltage/Capacity
|
12V/70AH
|
|
Service
life
|
5-8
years, 2 years warranty.
|
|
Light
source
|
Type
|
LED
-NICHIA SMD
|
Power
|
5W/PC
|
|
Quantity
|
7PCS
|
|
Service
life
|
50,000
hrs
|
|
Power
Box
|
Aluminum
magnesium alloy aluminium, suggest install height:1.3-1.5M
|
|
Performance
|
Battery full
charged A:1pc lamp:>240 hrs B:3pcs lamps>80 hrs Optional parts:
A: Two head DC cable 3M B: DC TV:
14"/17"/21"
C:DC
Fan:16"/15W
|
|
Package
|
20’ft container : sets
40’ft container: sets
|
|
Whole Set
|
For the Standard parts of DC TIMES 100W, the warranty is 2 years.
During two years, if there is any quality problem, UAGES will change new one
to the distributor.
|
Battery
|
The life span of battery is 5-8
years, our warranty is 2 years. During two years if there is any quality
problem of the battery, we will change new one to the distributor. Customers
can change at the distributor’s office.
|
Optional parts
|
The warranty of optional parts: DC
fan, DC TV is 1 year.
Contact us E-mail: Info@u-ages.com or Toll Free (800) 398-8201
|
Subscribe to:
Posts (Atom)